English
11 - EN
Washing Procedure
1. Loading
Open the door, put in the laundry
piece by piece.
Close the door tightly.
Notes:
1) When
fi
rst using the washing
machine,let it run unloaded for
one program to prevent the
laundry from being tainted by oil
or dirty water from the washing
machine.
2) Do not overload the washing
machine.
2. Adding detergent
Slide out the detergent drawer and put the required detergent and softening agent into the
corresponding boxes. Push back the drawer gently.
Caution:
1) For pre-washing program, detergent should be added to both
compartments 1 and 2. Compartment 2 allows only solid
detergents.
For other programs, do not add detergent to compartment 1.
2) Do not overuse softener; otherwise, it will damage the arti
fi
cial
fi
bers. Refer to the instructions during use.
3) The softener can not exceed the „MAX“ on the siphon hat. And the
softener should not be too ropy.
4) If select the delay-time function,make sure the compartment is
dry,or the detergent will remain in the compartment.
3. Selecting washing program
To get the best washing effect, an appropriate washing program should be selected according to the
laundry type.
Note: The above operations refer to conditions without power-off memory. Or the washing machine
will continue operation from where the program was broken. To clear memory, press the Start/Pause
button. Turn off the power for a few seconds and turn on again, all the settings will be renewed.
• Overalls
(cotton appr
950g)
• Blended fabric
clothes
(appr 800g)
• T-shirt
(cotton appr
300g)
• Jackets
(cotton
appr 800g)
• Jeans (800g)
• Pajamas
(appr 200g)
• Shirts
(appr 300g)
• Underwear
(blended fabrics
appr 70g)
• Socks (blended
fabrics appr 50g)
• Woolen
blankets
(appr 3000)
• Single bed sheets
(cotton appr 800g)
Load Reference
