English
13 - EN
Maintenance
1. Turn of the water and electricity supply
after every wash. Open the door to prevent
the formation of moisture and odors. If
the washing machine is left idle for a long
period, drain any remaining water in the
machine and replace the drainage hose.
2. Uplug the machine during cleaning and
maintenance. Use a soft cloth dampened with
soapy. Liquid to clean the machine case and rubber
components. Do not use corrosive or abrasive
chemicals or solvents.
3. Clean the detergent compartment
regularly. For the detergent compartment
similar to
fi
gure (a), raise the compartment
slightly to remove and replace after
cleaning.
4. Clean the
fi
lter Cleaning methods
(once a month)
1) Pick up the bottom cover lightly (Fig. 1);
2) Screw out
fi
lter by turning counterclockwise
(Fig. 2);
3) Flash clean with running water;
4) Replace the
fi
lter by turning clockwise and
remount the cover.
Caution:
The
fi
lter must be in place, or it may lead
to leakage. (Fig. 3)
5. To prevent blockages to the
water supply or the ingress of
contaminants, clean the water inlet
and inlet water
fi
lter regularly.
6. If the machine is to be moved a distance location,
replace the vibration mounting locks which were removed
during installation as snown below.
Remove the
back cover.
Remove the
rubber plugs.
Insert the bolts.
Tighten the bolts
with the spanner.
Replace the
rear panel.
7. If the washing machine is left idle
for a long period turn off the water
and electricity supply and open the
door slightly to prevent the formation
of moisture and odors.
Fig. 1
Fig. 2
Fig. 3
Obr. (a)
