20
19
CLEANING
AND
MAINTENANCE
By ensuring proper cleaning and
maintenance of your cooker you can have
a significant influence on the continuing
fault-free operation of your appliance.
Before
you
start
cleaning
,
the
cooker
must
be
switched
off
and
you
should
ensure
that
all
knobs
are
set
to
the
"
●
"
position
.
Do
not
start
cleaning
until
the
cooker
has
completely
cooled
.
Front
side
of
the
casting
For cleaning of frontal part of the cooker
use the usual cleaning agents and follow
the manufacturer’s instructions.
Never use any aggressive cleaning agents
or dish cleaning accessories which might
cause scratches.
Enamel
coated
and
plastic
surface
Clean the knobs and handles with soft
cloth and liquid cleaners, intended for use
of smooth enamel surfaces.
Cooktop
Gas grid, cooking area and burner
components should be cleaned with warm
water and mild detergent for manual
washing of dishes.
Thermal element and ignition device
should be cleaned with soft brush. To
ensure perfect operation, these elements
must always be thoroughly clean.
Clean the crown and the crown cap.
Always keep the gas outless nozzles on
the burner crown free of dirt.
Upon completion of cleaning wipe all
components dry and replace them carefully
to their respective slots. Oblique position of
components may cause troubled ignition of
burners.
Crown caps are coated with black enamel.
Discoloration of caps, due to high
temperatures, is inevitable, but is has no
adversary effect on normal operation of
burners.
Oven
The oven should be cleaned after
every use. When cleaning the oven
the lighting should be switched on to
enable you to see the surfaces better.
The oven chamber should only be
washed with warm water and a small
amount of washing-up liquid.
After cleaning the oven chamber wipe
it dry.
Do not use cleaning products containing
abrasive materials for the cleaning and
maintenance of the glass front panel.
Caution
!
Caution
!
Replacement
of
the
oven
light
bulb
Door
removal
In order to obtain easier access to the oven
chamber for cleaning, it is possible
to
remove the door, to do this, tilt the safety
catch part of the hinge upwards, close the
door lightly, lift and pull it out towards you,
in order to fit the door back on to the
cooker, do the inverse. When fitting,
ensure that the notch of the hinge is
correctly placed on the protrusion of the
hinge holder. After the door is fitted to the
oven, the safety catch should be carefully
lowered down again, if the safety catch is
not set it may cause damage to the hinge
when closing the door.
Door
removal
Door
removal
Remove only
CLEANING
AND
MAINTENANCE
