Operation
Haier LED HDTV
EN-10
Connection Option 2
Connect the audio and video cables from the Cable
A
Box's output jacks to the TV input jacks, as shown in the
figure.When connecting the TV to a Cable Box, match
the jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
Select the input source by using the
B
INPUT
button
on the remote control or on the TV.
Select your desired channel with the remote control
C
for cable box.
HDMI input
How To Connect
Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
How To Use
Select the input source by using
A
INPUT
button on
the remote control or on the TV.
Operate the corresponding external equipment.
B
Refer to external equipment operating guide.
Operation
In the manual, the OSD (on screen display) may be
different from your TV’s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.
Switching On/Off the TV set
First, connect power cord correctly.
A
Select the viewing source by using
B
INPUT
button on
the remote control.
When finished using the TV, press
C
POWER
button on
the remote control. The TV reverts to standby mode.
If you intend to be away on vacation, disconnect the
D
power plug from the wall power outlet.
Note
If the TV in power on , the screen show information
R
according the type of input signal, the information
will disappear. If there is no signal, “No Signal” will
display on the screen.
Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
Choose
A
TV
Input and then press
MENU
button.
Press
B
CH+/-
button to select
Function
menu.
Press
C
VOL+
/
ENTER
button and then use
CH+/-
button to select
Language
.
Press
D
VOL+/-
button to select language.
(
English, Spanish or French
)
Function
Language
English
OSD Timeout
Short
OSD Transparency Middle
DCR On
Blue Screen
On
Time Setup
Closed Caption
Default
Select
CH+/-
VOL+/-
Back
EXIT
Video
Audio
Channel
Lock
Function
DPMS On
Screen Mode Normal
Choose the Input source
Change the picture source so you can watch your
TV, VCR, DVD, Cable , or any other devices that are
connected to your TV.
Press
A
INPUT
button to enter the Select Source menu
and then use
CH+/-
button to select the desired
items (TV, composite, Component, PC, HDMI).
Press
B
ENTER
button to confirm .
PC/DVI AUDIO IN
PC IN
HDMI IN
DIGITAL OUT
(COAXIAL)
HDMI
