9.3
After installing the hob, make sure that
•
The power supply cable is not accessible through cupboard doors or drawers.
•
There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
•
If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below
the base of the hob.
•
The isolating switch is easily accessible by the customer.
9.4
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
9.5
Adjusting the bracket position
Fix the hob on the work surface by insert 6 brackets on the bottom of hob(see picture) before installation.
Adjust the bracket position to suit for different table top thickness.
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after
installation (see picture).
E
NGL
ISH
EN-32
