Maintenance Service and Trouble Shooting
Item Position
Normal
value
Two ends of the heater
About less than 1
Ω
Resistance value
End and shell of the
heater
Infinite
Attention: In test of the magnetron, confirm that the gasket is in good condition
and installed well.
D.
Test of the high-voltage capacitor
Under normal condition: 1. The resistance value of the two terminals shall be several
ohm at the beginning of the test, then return to infinite.
2. The resistance value between the terminal and the shell is
infinite.
E. Test of the high-voltage diode
Measure with RX1000 range. The conduction resistance value shall be several ohm.
No matter which step is used in the measurement, the result shall be infinite.
F. Measurement of the fan motor
The resistance value of the two terminals shall be 200~300ohm
G. Measurement of the rotary tray motor
- 17 -