Maintenance Service and Trouble Shooting
8.Maintenance Service and Trouble Shooting
8.1SERVICE GUIDE AND REPLACING PARTS
8.1.1 Tools and gauges
8.1.2 Necessary tools
9.1.3 Necessary gauges
Generally, the tools used in maintenance of (1) Universal meter
the TVs are suitable for the maintenance of (2) Microwave leakage detector:
the microwave oven. The standard set of
(3) Ruler
tools is: (4) Glass thermometer 100
℃
(1) Angle pliers
(2) Nipper pliers
(3) Cross Screwdriver
(4) Monkey-spanner
(5) Iron, solder
(6) 6mm box spanner
Leakage test of the microwave oven
Measurement
Points of attention:
(1) Set the gauge according to the
(1) Please first check the leakage of the
user’s manual.
Microwave oven after maintenance and
(2) Add 15-275ml, 5
℃
-20
℃
water
before usage.
into a container, and put the
(2) If the microwave oven can operate
container at the center of the tray.
while the door is open, STOP ANY
(3) Set the oven at the highest
OPERATION OF THE OVEN.
power level to start working.
(3) The leakage standard of the microwave
(4) Measure the leakage with the
oven is <5mW / cm
×
cm.
leakage detector. The detecting
gasket is 5mm thick, and the probe
shall be perpendicular against
- 11 -