background image

4

CAUTION

Do not wash the air conditioner with water.

Do not install the system where the air outlet
reaches directly the flora and fauna.

Make sure to use a fuse of proper electric
rating.

Do not operate the system while the
air outlet grill is removed.

It is strictly prohibited to place a container of
combustible gas or liquid near the air condi-
tioner or to spray it directly with the gas or liquid.

Neither stand on the air conditioner nor
place something on it.

Do not use the power switch to turn on or
off the system.

Do not touch the  air outlet section while
the swing louver is operating.

Do not use such equipment as a water
heater, etc. around the indoor unit or the
wire controller.

ON

OFF

It could cause electric shocks.

It will not be good for their health.

Use of steel or copper wire in place of a fuse is strictly
prohibited because it could result in a trouble or fire
accident.

There is a risk of injury.

It could cause a fire accident.

There are risks of falling or injury by collapsed object.

It could cause a fire or water leakage.

There is a risk of injury.

If the system is operated at the vicinity of such equip-
ment which generates steam, condensed water may
drip during cooling operation or it could cause a fault
current or short-circuit.

When operating the system simultaneously with a combustion
apparatus, indoor air must be ventilated frequently.

Check occasionally the support structure of the unit for any damage
after a use of long period of time.

Insufficient ventilation could cause an oxygen deficiency accident.

If the structure is not repaired immediately, the unit could topple down to cause
a personal injury.

When cleaning the system, stop the operation and turn off the
power switch.

Do not put water containers on the unit such as a flower vase, etc.

Cleaning should never be done while the internal fans are running with high
speed.

If  the structure is not repaired immediately, the unit could topple down to cause
apersonal injury.

WARNING

CAUTIONS FOR TRANSFER OR REPAIR

Modification of the system is strictly prohibited. When the system
needs a repair, consult your dealer.

When the air conditioner is relocated, contact your dealer or a pro-
fessional installer.

Improper practice of repair could cause water leakage, electric shock or fire.

Improper practice of installation could cause water leakage, electric shock or fire.

Safety Precautions

Summary of Contents for AD182AMEAA






















Reviews: