background image

- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

1

. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and

a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen.

2.

 Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.

If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.

The PDP Manufacturing Process: a few minute colored dots may be present on the PDP screen

The PDP (Plasma Display Panel), which is the display device of this product is composed of 0.9 to 2.2 million cells. A few cell
defects will normally occur in the PDP manufacturing process. Several tiny, minute colored dots visible on the screen should
be acceptable. This also occurs in other PDP manufacturers' products. The tiny dots appearing does not mean that this PDP 
is defective. Thus a few cell defects are not sufficient cause for the PDP to be exchanged or returned. Our production
technology minimizes these cell defects during the manufacture and operation of this product.

Owner s Manual   31

Summary of Contents for 42EP24S - 42" Plasma TV


































Reviews: