Figure 6
-
Hookup to an HAI system
Additional thermostats are connected in parallel. They may be
connected in home-run or daisy chain configuration.
REMOTE DAY/NIGHT SETBACK SWITCHES
The thermostat can be connected to a remote system or remote
switch. A signal can be sent from the remote location to change the
thermostat temperature settings from the "DAY" setting to the
"NIGHT" setting. To use this mode, setup item 01 -
"Communications mode" must be set to 24.
Run a two conductor wire from the remote system or remote switch to
the thermostat location. Make the connections using supplied wire
splices - See Figure 7.
* Red and yellow wires are not used.
Insulate each using a small piece of tape.
Figure 7 -
Hookup to remote Day/Night setback switch
OTHER SYSTEMS
For connections to personal computers, utility management systems,
and other automation systems, refer to connection diagrams provided
with personal computer software package or other system.
COMM
BLACK
GREEN
+12V
ANY SYSTEM WITH
A RELAY OR
12VDC OUTPUT
*
RC-100
19
