The thermostat will automatically exit Setup mode after 20 seconds
of no key activity.
To enter the Installer Setup, set Mode to "OFF". After 10 seconds,
press the Prog key three times (day will flash), then press the Fan
key.
The word "default" indicates the initial setting when the thermostat is
delivered from the factory.
00 Address
If you are using Communications Mode 0 or 1, and you are installing
more than one thermostat, each must be set to a consecutive address,
starting at 1. The default address setting is 1.
An address from 1- 127 may be selected.
01 Communications mode
The thermostat can communicate with remote systems in 4 different
modes. These modes are:
0
300 baud, RS-232 mode (for use with personal computers)
1
100 baud, System mode (Omni, OmniPro, and Aegis systems)
8
PESM mode, (use with Model 1503 automation systems)
24 Day/Night mode (for use with remote setback switch)
The default setting is 1.
ITEM NUMBER
VALUE
10
