1
INSTALLATION
Install the receiver in a central area of the premises, as high above ground as practical.
The receiver may be mounted up to 1000 feet from the HAI controller.
¾
The receiver should be at least 5 feet from the controller or any other
electronic device.
¾
Avoid areas where receiver will be exposed to moisture.
¾
Avoid areas with excessive metal or electrical wiring. If unavoidable,
mount where antenna extends above a metallic surface.
When the location of the receiver has been established:
1.
Position the supplied Mounting Base so that the Mounting Base Latch
is at the top. Hold the Mounting Base against the mounting surface
(allow at least a 6-inch clearance above the Mounting Base) and secure
it using the supplied screws (see Figure 1).
2.
Align the notches on the back of the Wireless Receiver case with the
tabs on the Mounting Base. Make sure the tabs are fully inserted into
the notches and push downward to latch.
MOUNTING
BASE
MOUNTING
BASE LATCH
MOUNTING HOLE
TAB
TAB
MOUNTING HOLE