HAI 45A00-1, Installation Instructions Manual, Page: 16 / 16

To enter Setup Mode, press and hold the Mode/Advance
switch for 2 seconds.
DISPLAY
DESCRIPTION SET SWITCH MODE/ADVANCE
SWITCH
A 1
Enter the receiver
address Changes the current
address (1-8) Advances to the next
item
n 1
Enter number of
addresses Changes number of
addresses (1-4) Advances to the next
item
1
Displays the status of
transmitter 1 Changes characteristics
of transmitter Advances to the next
transmitter
2
Displays the status of
transmitter 2 Changes characteristics
of transmitter Advances to the next
transmitter
3
Displays the status of
transmitter 3 Changes characteristics
of transmitter Advances to the next
transmitter
Characteristics of Transmitters:
DISPLAY
MODE
LED
TYPE LED DESCRIPTION OF THE DISPLAY
1
OFF OFF No transmitter is programmed at this address
1
*
OFF BLINKS This transmitter is not supervised and doesn't
send restore transmissions
.1
*
ON BLINKS This transmitter is not supervised but sends
restore transmissions
1.
OFF ON This transmitter is supervised but doesn't send
restore transmissions
.1.
ON ON This transmitter is supervised and sends
restore transmissions
To reset memory, press and hold the Set and Mode/Advance
switches together for 2 seconds.
DISPLAY DESCRIPTION SET SWITCH
E E Erase EEPROM ?
(Reset Memory) Press and hold Set & Mode/Advance switches
together for 2 seconds