This is the normal operation display for OPERATING MODE 2. The 00979 represents the number of
gallons of softening capacity between regenerations. This completes the SERVICE SETTINGS mode.
Even though the SERVICE SETTING mode has been completed, the Series 96 is not ready for service until the
CUSTOMER SETTINGS mode is completed. The following example takes you through the steps required for
setting the parameters of the CUSTOMER SETTINGS mode for OPERATING MODE 2.
1.00
Push and hold the DISPLAY to enter CUSTOMER SETTINGS mode. The display will show:
Set Time 00:00 AM
This parameter is to be set to the current time of day.
1.00a Push the SELECT and CHANGE buttons until the desired time is displayed.
In this example, set time to: Example: 11:00 AM or 05:00 PM.
2.00
Push the DISPLAY button to step to the next parameter. The display will show:
Reg Time 02:00 AM
This parameter is to be set for the desired time a normally scheduled regeneration is to occur.
2.00a Push the SELECT and CHANGE buttons until the desired time is displayed.
In this example, set to: Reg. Time 02:00. (02:00 is 2:00am)
3.00
Push the DISPLAY button to step to the next parameter. The display will show:
# People 04
3.00a Push the CHANGE button until the correct number of people in the household is displayed.
In this example, set to:
# People 05
5.00
Push the DISPLAY button to save the parameter settings and exit the CUSTOMER SETTINGS mode.
The display will show:
Gal Remain 00979
If you followed the above directions correctly, your Series 96 Control
is ready for OPERATING MODE 2 service.
NOTES: ______________________________________________________________________________________
Series 96 Owner’s Manual
13
