PROGRAMMING THE SERIES 96
The Series 96 allows a variety of programming options, from setting the time
of regeneration and the number of people to adjusting the hardness, capacity
settings, and cycle settings*.
Here’s how it works:
The Series 96 calculates how much water a family will need in a day based on
the number of people. Whenever the gallons remaining drops below the
reserve capacity, the gallons remaining will be replaced with the word “Regen
Scheduled” and the Series 96 will automatically regenerate when it reaches
the REG TIME. Also as a safety feature, if the appliance's capacity is
exceeded, a demand (immediate) regeneration will occur. This way a family
should never run out of soft water and the appliance will not regenerate more
than it needs to.
*For optional cycle settings, see page 36
NOTES: ______________________________________________________________________________________
Series 96 Owner’s Manual
8
NOTE: To ensure expected performance,
the controller will not allow you to enter
certain values for the number of people
if it means the amount of softening
required would exceed the appliance’s
capacity. Should the controller not
accept a value, check the capacity and
salt settings.
