Hagstrom KE-USBMX20 User Manual Download Page 2

Page: 2 / 28

Table of Contents

Introduction to the KE-USBMX20

Computer Connection

Interfacing to the KE-USBMX20 Header

Status Feedback LED

The KE-USBMX20.EXE Program

The Program Screen

File Menu Selections

Sample KE-USBMX20 Conﬁ guration

KE-USBMX20 Conﬁ guration with FN key

Error Messages

KE-USBMX20 Operating Tips

Appendix A: Speciﬁ cations

Appendix B: Command Line Loader

Accessories

Thank you for purchasing the

HAGSTROM ELECTRONICS, INC.

KE-USBMX20. This product is conﬁ gurable in a variety

of ways to meet your speciﬁ c requirements. Please

take a few minutes to read this manual before using

your KE-USBMX20.

Warranty

HAGSTROM ELECTRONICS, INC.

warrants this

product against defects in material or workmanship for a

period of ONE YEAR from the original purchase date. We will

repair or replace (at our option) the returned defective unit

at no charge during this warranty period.

No responsibility is assumed for any special, incidental,

or consequential damage resulting from the use of or

inability to use this product. In no case is

HAGSTROM

ELECTRONICS, INC.

to be liable for any amount which

exceeds the purchase price of the unit, regardless of the

claim.

No other warranty, written or verbal, is authorized. This

warranty is applicable only to units sold in the United States.

Units sold outside the United States are covered by a similar

warranty.

Depending on the state in which you live, you may have additional rights.

Great care has been taken during the assembly, testing, and burn-

in of your KE-USBMX20 to ensure its performance. If you have any

questions, please send us an email or give us a call. Support is

available Monday through Friday, 8:00 am to 5:00 pm (EST).

customer service email

[email protected]

Call Toll Free

888-690-9080

, or

(540) 465-4677

Summary of Contents for KE-USBMX20





























Search results

Summary of Contents for KE-USBMX20

Reviews:

Related manuals for KE-USBMX20

Brands by name

Popular brands

Hagstrom KE-USBMX20, User Manual

Search results

Summary of Contents for KE-USBMX20

Reviews:

Related manuals for KE-USBMX20

Brands by name

Popular brands