59
IV.
OPERATING SYSTEMS
E. OPERATING THE QUICK-ATTACH SYSTEM
1/2” hex bolt
1/2” snap lock pin
BOOM STANDS
-
If your boom option is equipped with boom stands,
there are two on the transom and one on each of the inner sections of the
booms. This is an option and not mandatory on every boom. Do not be alarmed
if your boom does not have stands with it. Contact the Hagie Customer Service
Department if you would like to have stands.
The stands are very simple. They are a brackets attached to the end of the
first boom section on both booms and two on the transom. Each has a leg with a
foot on the bottom. Each has a hex bolt in the top hole of the leg to secure it
from sliding off, and a snap lock pin in the hole directly below the bracket to
maintain it’s position.
Do not leave the stands in the lowered position at anytime while moving the
boom. Damage may occur to the boom if the stand were to catch uneven ground
or an unseen object. Raise the foot all the way up and place the pin in the hole
above the bracket.
foot
bracket
leg
foot
1/2” hex bolt
1/2” snap lock pin
bracket
leg
OPERATING SYSTEMS
Summary of Contents for UpFront STS 16
Page 119: ...113 IX TROUBLE SHOOTING NOTES TROUBLE SHOOTING...
Page 127: ...NOTES NOTES...
