Hagie UpFront STS 16, Operator'S Manual

Page: 110 / 127

VIII.
STORAGE
104
STORAGE
B. REMOVING THE SPRAYER FROM STORAGE
1. Inspect the condition, and test the air pressure of all the tires.
2. Carefully unseal all openings that were sealed in the storage process.
3. Clean and reinstall the batteries. Be sure to attach the battery cables to the proper terminals.
4. Tighten all belts. Inspect and replace any worn belts.
5. Check the engine oil, hydraulic oil, and engine coolant levels; add if necessary. A mixture of 50/50 anti-
freeze and water will cool adequately in summer as well as protect in winter.
6. Completely clean the sprayer.
7. Review section five on maintenance and perform all needed services as instructed.
8. For starting instructions, refer to Section 4 on operating information.
NOTE:
Protective compounds such as grease can
harden under exposure to weather conditions.
Be sure to remove any dried grease and re-
apply new if necessary.
NOTE:
See Warranty on page 114
concerning improper storage .