8-14
SECTION 8 –
MAINTENANCE AND STORAGE
SERVICE - BELTS
Engine Drive Belt
Removal
•
Insert a 3/8” square ratchet drive into the
belt tensioner.
•
Lift UP and remove the Engine Drive
Belt.
Inspection
•
Visually inspect the Engine Drive Belt
daily.
•
Check the belt for intersecting cracks.
NOTE: Transverse cracks (across the belt
width) are acceptable. Longitudinal
cracks (direction of the belt length)
that intersect with transverse cracks
are not acceptable.
•
Replace the Engine Drive Belt if it
becomes frayed or has material missing.
A/C Compressor Belt
-If Equipped
Visually inspect the A/C Compressor Belt
daily. Replace the belt if it becomes frayed or
has missing material.
•
To tighten the A/C Compressor Belt,
loosen the two Pivot Bolts and the two
Slide Bolts.
•
Using a pry tool, adjust the tension of the
A/C Compressor Belt to desired tautness.
•
While maintaining tension, re-tighten all
four bolts.
SERVICE - BOLT TORQUE
Wheel Bolts
NOTE: If you do not have the proper
equipment to mount a tire, contact a
local qualified tire service center.
-Typical View
-Typical View
NOTICE
Check lug nut torque immediately after
receiving the machine and every 50
hours of operation thereafter.
• Pivot
Bolt
• Slide
Bolt
-Typical View
Summary of Contents for DTS 10
Page 122: ......
