SECTION 7 –
SPRAY SYSTEMS
7-10
•
Press desired Boom Solution Valve
Switch in the DOWN position to turn
OFF.
NOTE: The number and location of Boom
Solution Valves varies according to
boom length. 60-ft. booms are
divided into three sections with
valves mounted on the transom. 80/
90-ft. booms are divided into five
sections with three valves mounted
on the transom and one mounted on
each boom.
Boom Solution Valve Indicators
The Boom Solution Valve Indicators
(located on the transom) allow you to view
system status for the following:
•
(2) Fence Row Indicators
•
(5) Spray Section Indicators
Master Spray Switch
Main solution power and Boom Solution
Valve Switches are controlled by the Master
Spray Switch (located on the lower right-
hand side of the steering column) and must be
ON to supply power.
This allows you to turn all of the Boom
Solution Valves on or off at the same time,
such as turning them off when you reach the
end rows, and turning them back on when
you re-enter the field.
•
Press the Master Spray Switch DOWN to
turn ON. Press switch again to turn OFF.
NOTE: When the Master Spray Switch is
ON, the Master Spray Indicator
(located on the side console) will
illuminate.
Boom Solution Valve Switches
(Located on the side console)
-Typical View
Boom Solution Valve Indicators
(Located on transom)
-Typical View
• Spray
Section
Indicators
• Left Fence
Row
Indicator
• Right Fence
Row
Indicator
Master Spray Switch
(Located on the lower right-hand
side of steering column)
-Typical View
Summary of Contents for DTS 10
Page 122: ......
