FryBaby Kit Manual
3
1 Before You Begin
Description
Congratulations! You have just purchased one of the highest performance-per-dollar
audiophile products available. The FryBaby audio system conditioner is a burn-in signal
generator designed especially for cables and interconnects. It can also be used to burn-in
linestages, phonostages, and amplifiers. The sophisticated electronic waveform – a
combination of wideband noise and variable frequency amplitude modulation – is
designed to provide maximum effectiveness without resorting to high power levels.
FryBaby is part of the FryKleaner
TM
series of professional cable burn-in generators.
The FryBaby half-kit consists of a blank circuit board, LED dome lens, lens ring, four
screws, some wire, and these instructions. To complete, you must purchase the
remaining parts yourself from Mouser Electronics (
www.mouser.com
).
Features
•
Unique signal waveform
•
Three output levels
•
iRIAA equalized for MC and MM phonostages.
•
Includes power supply
•
Breaks in both cables and electronics
Tools
You will need a few basic shop tools (screwdriver, pliers, wire cutters, etc.) and a fine-tip
soldering iron to build this kit.
Summary of Contents for FryBaby
Page 1: ...HAGERMAN T E C H N O L O G Y FryBaby Audio Burn in Generator...
Page 12: ......
