hager KEH31D00S3LMA, System Manual

Page: 90 / 92

Glossary
90 Technical changes reserved
User group of the busbar trunking system BTS
The unibar H is set up to establish busbar trunking systems BTS according to the
series of standards EN 61439 Part 1 and Part 6. The following responsibilities
apply according to EN 61439-1:
Project
participants Responsibilities according to EN 61439: Overview
Planner
Specifies a requirement profile for a busbar trunking system BTS
according to the black box principle
-
Connection to the electrical system
- Circuits and consumers
- Installation and ambient conditions
- Operating and maintenance.
Planning is carried out by Hager in cooperation with the user
(agreements, circumstances on site)
Original
manufacturer
Is responsible for verifying the design by means of verification tests,
calculations or the design rules according to EN 61439-1/-6
Hager is the original manufacturer of the unibar H busbar system.
Manufacturer
Builds the finished busbar trunking system BTS and is responsible
for, among other things:
-
Dimensioning the busbar trunking system BTS according to the
planner data
- Compliance with the design verification of the original
manufacturer
- Designation of the system and documentation
- Performance of the routine verification
- Declaration of conformity..
Operator
- Receives a busbar trunking system BTS conforming to EN 61439
and the necessary certificates for verifying the conformity
- Commissions the system manager
- Instructs the personnel
- Develops a safety concept / risk assessments
- Orders suitable safety measures.
User
According to EN 61439, the user is an involved party who specifies, purchases,
uses and/or operates switchgear and controlgear assembly. The user may also
be someone who acts in the name of the involved party.
Operator
The responsible operator of an electrical system as an owner, leaseholder or
lessee.