hager KEH31D00S3LMA, System Manual

Page: 67 / 92

Installation, handling and maintenance
Technical changes reserved 67
7.2 Transport and storage
7.2.1 Lifting busbar elements
The following must be avoided when transporting busbar elements
-
Damage to the busbar elements, particularly at the ends,
-
Damage to the painting.
Transport is always carried out in the horizontal plane, lying flat.
The busbars and busbar elements can be lifted
-
manually (weight-dependent),
-
using non-metallic slings,
-
using lifting devices such as forklifts, if the busbar elements are secured on
wooden pallets or are packed in wooden crates.
Lifting with slings
-
using non-metallic slings on each element
Lifting with slings
Maximum spacing of the slings: 2 m
-
The distance between the two lifting points must be no greater than 2 m. The
two lifting points must not be at the ends of the busbar / busbar element.
Lifting devices
-
When transporting with lifting devices such as forklifts, pallet trucks or roller
devices, take care that busbar elements are secured on wooden pallets or
are packed in wooden crates.
-
Mechanical hoists can only be used if the lifting points on busbar elements
are packed inside wooden crates or are made when secured on wooden
pallets.