18
5.4
SETTINGS
5.4.1.
Start-up and Shutdown
Press POWER to turn the unit on.
The unit runs in smart mode as default.
Press MODE button to select the desired operation mode.
Press POWER again to turn off the power.
5.4.2.
Operation mode
The unit has five operation modes: Cool, heat, auto, fan, dry.
A. Cooling your room
Select the cool mode to lower the temperature in your room.
Press MODE button repeatedly until the LED of COOL operation lights up.
Press ADD/MINUS button to adjust the temperature which is displayed on the
screen. The temperature can be set between 16
℃
and 32
℃
.
Press SPEED button repeatedly until the desired fan speed indicator lights up.
To control the direction of the air flow horizontally, please adjust the inner
louver by hand. To control the direction of the air flow
vertically
, please press
the SWING button on.
Note
：
The air conditioner stops if the room temperature is lower than selected
temperature.
B. Heating your room
Press MODE button repeatedly until the LED of HEAT operation lights up.
Press ADD/MINUS button to set the temperature higher than the room
temperature. The fan speed can also be set.
Note: The drainage hose should be attached to the unit for continuous operating.
C. Ventilating your room
Press MODE button repeatedly until the LED of FAN operation lights up.
In ventilation mode the room air is circulated, but not cooled.
Press SPEED button repeatedly to select the fan speed as desired.
