Hafele Free flap E, Manual

Page: 49 / 160

49/160
HDE
10/
201
7
1
2
.0
001.
010
.4
26.
0000
.00
732.
23.
027
en
9. Troubleshooting
10. Technical data
Interference Cause Remedy
Not working Mains voltage not present Check whether power plug has
been inserted
Plug connections have
no contact Check all plug connections
for proper contact
After 2 minutes of perma-
nent operation - stop for
8 minutes Wait for 8 minutes
Unable to perform
reference run Push button sender /
drive unit coordination
not carried out Perform push button sender
coordination, see chapter
4.1 Teach in push button
sender
Battery in push button
sender empty, not present
or wrongly inserted Insert new battery or check for
correct installation position,
see chapter
7.3 Battery
change
Reference run starts
but is not completed Force setting of fitting does
not match flap weight Perform force setting as per
point 12 of the Free flap fitting
installation instructions
Reference run
restarts Power failure Perform reference run,
see chapter
5.1 Initiating a
new reference run
NOTE
» Contact your specialist dealer if the fitting is still defective after performing the
described remedial measures or other interferences arise.
72072
V1-13072015
24415
Lfd.Nr. 350
F2014300
Software version
Date DMY
Consec. no.
Checker
Manufacturing order
Item
72071
SW 09
15615
Lfd.Nr. 248
F2013292
0062
0136
Free E
Type 72071 (for Free fold, Free up, Free swing)
Type 72072 (for Free flap)
Voltage / Frequency / Current strength
100 - 240 V AC / 50 - 60 Hz / 1.3 A
24 V DC / 2.5 A
Drive power consumption 60 watts
Ambient temperature range 0 - 40 °C
Protection class (with power supply included
in scope of delivery) 2
Protection class (with power supply
not included in scope of delivery) 3
Emission sound pressure level < 70 dB (A)
Radio frequency 2.4 GHz
Radio remote control battery CR 2032 Lithium button cell, 3 V
Standby power ≤ 1 Watt
NOTE
» The drive may only be operated with safety low voltage in accordance with the
marking on the device.