732.28.920
HDE 17.03.21
35/52
8.1.12.
If you have inadvertently exceeded the desired mar
-
kings, you can use the one-handed clamp (spread
setting) to push the components apart again. To do
this, set the one-handed clamp to „spreading“ (8.1.6)
and position one jaw each in the milled recess of the
two stringer elements which are to be pushed apart
(see photo). By operating the pump lever the compo-
nents can now be spread apart.
8.1.13.
Now connect all components of the inner stair stringer
using the one-handed clamp.
8.1.14.
Mount the outer stair stringer. To do this, take the
components of the „outer stair stringer stack“ and
connect all elements according to 8.1.10 to 8.1.12
until the stair stringer is completely assembled.
Then lay the outer stair stringer aside.
en
Summary of Contents for 819.50.810
Page 25: ...732 28 920 HDE 17 03 21 25 25 de ...
Page 49: ...732 28 920 HDE 17 03 21 49 52 en ...
Page 50: ...732 28 920 HDE 17 03 21 50 52 ...
Page 51: ...732 28 920 HDE 17 03 21 51 52 ...
