732.28.920
HDE 17.03.21
45/52
8.2.7.
There is a mark on the side of the tap fitting. Use
a pencil to transfer the mark (1) to the front of the
ceiling.
8.2.8.
Fold the stairs in. At the height of your marked
position, measure
horizontally 15 mm in the
direction of the stairs.
This position has also to
be marked on the front side of the ceiling.
The marking determines the later position
of the screw of the tap fitting. The exact
measuring, marking and drilling of this
position is therefore essential. If the devia-
tions are too large, the tap fitting cannot
accommodate the screw later.
8.2.9.
Depending on the properties of the ceiling, pre-drill
the mounting hole at the marked position.
Stone or concrete ceilings:
Insert a dowel that
matches the screw of the tap fitting.
8.2.10.
Screw in the screw of the tap fitting.
en
Summary of Contents for 819.50.810
Page 25: ...732 28 920 HDE 17 03 21 25 25 de ...
Page 49: ...732 28 920 HDE 17 03 21 49 52 en ...
Page 50: ...732 28 920 HDE 17 03 21 50 52 ...
Page 51: ...732 28 920 HDE 17 03 21 51 52 ...
