Häfele 535.02.222, User Manual

Page: 17 / 60

17
OPERATION
Control Panel
Switch on the appliance
Switch on the cooking zone
Selecting the cooking zone heat setting
•
●Immediately after the appliance is connected to electrical mains, all displays will light
up briefly. Your induction hob is then ready for use.
•
●The induction hob is equipped with electronic touch control sensor fields, which are
operated by touching with a finger for at least 1 second.
•
●Touching of a sensor field is accompanied by an acoustic signal to acknowledge.
No objects should be placed on the sensor fields (this could cause an error).
Touch sensor fields should be always kept clean.
If none of the sensor fields is touched within 20 seconds, the appliance
switches itself off.
If none of the sensor fields is touched within 20 seconds of switching on the
appliance, the cooking zone switches off.
A cooking zone is active when its display shows a digit or a letter. This in-
dicates the cooking zone is ready for the heat setting to be set or changed.
To switch on the appliance touch and hold the on/off sensor field (1) for at least 1 second.
All displays (3) will show the number “0”.
Once the appliance is switched on using the on/off touch sensor (1), select a cooking zone
(5) within the next 20 seconds.
1. When a cooking zone selection sensor field (5) is touched, “0” on the corresponding heat
setting indicator display will become bright.
2. Set the desired heat setting using the “+” (2) or “-” (4) sensor fields.
When the cooking zone display (3) shows bright “0”, start setting the desired heat setting
using the “+” (2) or “-” (4) sensor field.