Häfele 535.02.222, User Manual

Page: 12 / 60

12
INSTALLATION
Electrical connection
Warning!
All electrical work should be carried out by a
suitably qualified and authorised electrician.
No alterations or wilful changes in the elec-
tric-ity supply should be carried out.
The hob is manufactured to work with
a one--phase alternating current (230V
1N~50Hz) and is equipped with a 3 x 4
mm2 connection lead.
The electricity supply for the hob must have
a safety switch which enables the power to
be cut off in case of emergency. The dis-
tance between the working contacts of the
safety switch must be at least 3 mm.
Before connecting the hob to the power
sup-ply it is important to read the informa-
tion on the data plate and the connection
diagram.
Caution! The installer is obliged to provide
the user with “appliance electrical connec-
tion certificate” (enclosed with the warranty
card).
ive L: BN - brown
Neutral N: BU - blue
Earth PE: GNYE -green/yellow
Power circuit should be protected with a
32A fuse.
Recommended type of connection lead:
H05VV-F, 3 x 4mm2.
Connection diagram
Caution! Voltage of heating elements 230V.
Caution! In the event of any connection the
safety wire must be connected to the PE
terminal.
Important!
If the fixed power supply cable is damaged,
it should be replaced at the manufacturer
or at an authorized servicing outlet, or by a
qualified person to avoid danger.