![background image](http://html.mh-extra.com/html/hafco-woodmaster/t-13a/t-13a_user-manual_577850018.webp)
17
2. Crank the raising / lowering handle until the button
(B) comes in contact with the workpiece.
3. As you rotate the raising / lowering handle, the
needle on the depth of cut scale will move showing
you how much material will be removed in that
pass.
GETTING PREPARED
It is always a good idea to use a piece of scrap wood
for your first planing attempt. Also, before each use of
the planer, make it a habit of checking for loose fasten-
ers, fittings or hardware. Turn the planer ON and allow
it to reach full speed. Pay close attention to any exces-
sively loud noises that may be coming from the planer
or any excessive vibration. If either occurs, shut down
the planer immediately checking again for loose hard-
ware. Go through the ASSEMBLY and ADJUSTMENTS
sections again if necessary.
www.machineryhouse.com.au
www.machineryhouse.co.nz
Page 18
Instructions Manual for T-13A (W813)
1
1/9/19