HAEGER 618 MSPe, Operation Manual

Page: 44 / 92

40
SECTION 4 – TOUCH SCREEN OPERATION
Introduction
This section provides you, the operator, with all the information that you need to operate the Haeger
safely and productively.
Make sure that you read and understand all of the descriptions, instructions and notes contained in
this section. Heed all of the Warnings and Cautions in this manual.
Your safety and productivity depend on it.
Machine Controls

Read and understand all Warnings and Cautions in this manual and follow the instructions for testing the
Safety System in the Safety System section before attempting to operate this machine

NEVER wear anything metallic that may come into contact with the Upper Tool, Lower Tool or
workpiece (watches, rings, bracelets, etc.).

Never leave your foot on or above the Down footswitch after you have completed a cycle of the
machine. Remove it from the Down footswitch. Keep your feet away from the Down footswitch until
your hands are clear of the tooling area and you intend to lower or raise the Upper Tool Holder or
insert hardware.

NEVER Operate this Machine without wearing the proper eye protection!
Touch Screen
Control Panel
Emergency Stop
Foot Switches