HAEGER 618 MSPe, Operation Manual

Page: 51 / 92

47
Setting the TPS
1. Setting the TPS: The Tool Protection System (TPS) allows for the operator to do a first stroke setup of the
tooling. This is done to ensure the safety of the operator and the tooling by allowing only the correct
length of fastener to be inserted.
a. Step 1. Select the “Set up TPS” button from the main screen. This will be followed by a red
“Setting TPS” message.
b. Step 2. Depress the down foot pedal. The ram will move down and come into contact with the
lower tool. The machine will record that information.
c. Step 3. Depress the foot pedal again to complete the insertion cycle.
d. Step 4. The fastener insertion is complete. The upper tool holder will now move upward to its
resting place.
e. Step 5. Sample cycle test. Depress the foot pedal again, verify the setup is complete. If not, make
the adjustments to the settings and continue to normal production operations.