AXOS
5
Compact immunity test System
9
5.2
Rear view
The rear view of the AXOS
5
is shown in Figure 5-2. A detailed description of every input and output is written in the
Table 5-2 below the graphic.
1
2
3
7
6
4
5
8
9
10
Figure 5-2: AXOS
5
rear view
Pos.
Function
Description
1
L “EUT Supply Input” (direct
connection of power supply via
banana plug)
2
N “EUT Supply Input” (direct
connection of power supply via
banana plug)
3
PE “EUT Supply Input” (direct
connection of power supply via
banana plug)
direct single-phase connection of power supply to the EUT. It can
either be connected to a DC power supply or to AC power supply.
Awareness, the power supply should NOT be secured by a ground
fault Switch. If yes please take capture
Fehler! Verweisquelle
konnte nicht gefunden werden.
in consideration
4
V dip (for Voltage dips &
interrupts)
Input for the voltage dips und interrupts. For voltage interrupts it
has to be connected via banana plug with position 2. However.
when using external transformer, the only connection to the
generator is through the V dip input
5
“Link” to external HAEFELY
transformer DIP 116
Input for HAEFELY transformer DIP 116 for voltage dips, then
adjustable on 0%,40%, 70% and 80% in reference to the U1
nominal voltage of AXOS
5
. In any other case the transformer has
to be controlled independently and it will be connected only
through the “position 4” with the AXOS
5
.
6
“AUX” inputs and outputs
detailed description of function in Table 5-3
7
“RJ 45”Ethernet Interface
operation of the AXOS
5
through an external device, likely a PC for
the remote software
8
Sync. BNC Interface
The BNC interface is used for external synchronization of a
manual CDN
9
Main power switch for AXOS5
Switching on/off total power supply
10
Electrical grounding
The generator must always be connected to a reference earth
before every use
Table 5-2: description rear view
Summary of Contents for AXOS5
Page 1: ......
Page 6: ......
Page 49: ...AXOS 5 Compact immunity test System 43 15 Appendix 15 1 CE conformity ...
