Smartdop
®
30EX
Basic Operation
5-3-22 GUIDANCE
GUIDANCE enables / disables testing instructions to appear on the LCD. It is available in ARM/
LEG and TOE pressure modes during measurement.
Press the MENU button to go to Menu mode. Scroll up (PRINT button) or down (LEG/TOE
button) until GUIDANCE is highlighted. Press the probe selection button (Enter) or INF/DUMP
(right) to change the guidance options.
ON:
Displays guidance
OFF: Guidance is not displayed
Once GUIDANCE has been set, press the MENU button to exit and return to measurement
mode.
5-3-23 CURSOR
CURSOR is used to adjust the systolic pressure point. It is available in ARM/LEG and TOE
pressure modes.
Press the MENU button to go to Menu mode. Scroll up
(PRINT button) or down (LEG/TOE button) until CURSOR
is highlighted. Press the probe selection button (Enter) to
select Cursor mode. Press Right or Left to move the cursor
to the new systolic pressure point. Press Enter to set the
new pressure point or press MENU to cancel.
Once the CURSOR has been adjusted, press Enter to
set, then press the MENU button to exit and return to the
previous screen.
5-3-24 P.DISPLAY
P.DISPLAY is used to select the pressure value display. It is available in ARM/LEG and TOE
pressure modes during freeze mode.
Press the MENU button to go to Menu mode. Scroll up
(PRINT button) or down (LEG/TOE button until P.DISPLAY
is highlighted. Press the probe selection button (Enter) or
INF/DUMP button (Right) to change the setting.
ON: Displays pressure waveform with the pressure value(s) on the LCD.
OFF: Displays pressure waveform without the pressure value(s) on the LCD.
Once P.DISPLAY has been set, press the MENU button to exit and return to the previous
screen.
5. MODE & MENU SETTINGS
5-3
MENU (Cont.)
29
NOTE
The cursor can also be moved
by pressing and holding
down the MODE button, then
pressing the Right (INF/DUMP)
or Left (ARM) button. See 5-4
“SHORTCUT KEYS” for details.
NOTE
The pressure display can also
be turned on & off by pressing
the MODE button during freeze
mode.