Hadeco Smartdop 30EX Operation Manual Download Page 33

Page: 33 / 72

Smartdop

30EX

Basic Operation

5-3-16 OTHERS - CALIBRATION

CALIBRATION is used to display the 4-step calibration waveform on the LCD.

The Calibration setting is available during measurement mode in Mode 1 and Mode 2.

Press the MENU button to go to Menu mode. Scroll up (PRINT button) or down (LEG/TOE

button) until OTHERS is highlighted. Press the probe selection button (Enter) or INF/DUMP

(Right) to bring up the submenu. Scroll up or down until CAL (Calibration) is highlighted. Press

the probe selection button (Enter) or INF/DUMP (Right) to turn Calibration ON/OFF.

ON: Displays 4-step (3, 2, 1, 0, -1 kHz) calibration

waveform on the LCD
OFF: Displays normal Doppler waveform on the LCD

Once CALIBRATION has been set, press the MENU

button to exit and return to measurement mode.

5. MODE & MENU SETTINGS

5-3

MENU (Cont.)

5-3-14 OTHERS - LANGUAGE

LANGUAGE is used to change the LCD language preference.

Press the MENU button to go to Menu mode. Scroll up (PRINT button) or down (LEG/TOE

button) until OTHERS is highlighted. Press the probe selection button (Enter) or INF/DUMP

(Right) to bring up the submenu. Scroll up or down until LANGUAGE is highlighted. Press the

probe selection button (enter) or INF/DUMP button (right) to change the language.

Languages:

English, Deutsch, Italiano, Español, Français

Once the LANGUAGE has been selected, press the MENU button to exit and return to the

previous screen.

5-3-15 OTHERS - PRB-KEY

PRB-KEY is used to change the Probe button function.

Press the MENU button to go to Menu mode. Scroll up (PRINT button) or down (LEG/TOE

button) until OTHERS is highlighted. Press the probe selection button (Enter) or INF/DUMP

(Right) to bring up the submenu. Scroll up or down until PRB-KEY is highlighted. Press the

probe selection button (Enter) or INF/DUMP button (Right) to change the setting.

FREEZE:

Freezes/unfreezes the waveform

PRINT:

Activates/deactivates the printer

FRZ&PRINT: Freezes and prints the waveform

Once the probe button function has been set, press the

MENU button to exit and return to the previous screen.

NOTE

When the Smartdop® 30EX is
set on ARM/LEG or TOE mode,
the probe button performs the
same function as the INF/DUMP
button regardless of the PRB-
KEY function setting.

Summary of Contents for Smartdop 30EX









































































Search results

Summary of Contents for Smartdop 30EX

Reviews:

Related manuals for Smartdop 30EX

Brands by name

Popular brands

Hadeco Smartdop 30EX, Operation Manual

Search results

Summary of Contents for Smartdop 30EX

Reviews:

Related manuals for Smartdop 30EX

Brands by name

Popular brands