15
then remove it
(Figure 9, a/2)
. Fully detach the screws fastening the
sealing head
(Figure 9, b/3)
. Remove the spreader from the two
aluminium profiles
(Figure 9, b/4)
. Pull out the old knife assembly
(Figure
9, c/5)
.
After replacing the knife assembly build up the sealing head by carrying
out the above-mentioned actions in opposite order.
Note:
Always put the front cap back or the machine will not work!
Figure 9 How to replace the knife assembly
Only use original HACONA spare parts.
Hazard of injury.
Always wear protective gloves during operation.
