13
Die Finne
mit Harz an den Rumpf kleben.
Richtung beachten!!!
Glue the fin with epoxy to the fuselage.
Make sure of correct direction!!!
Die 3 Stiftscharniere sowie das doppelte Ruderhorn in
das Seitenruder einkleben. Gleicher Vorgang wie bei
den Tragflügeln und dem Leitwerk.
Glue the 3 pin the double control arm in the
rudder. Do it the same way as you did it on the ailerons.
Den “L
-
Stahldraht“ in den Rumpf einführen und im
Anschluss können die Stiftscharniere sowie der L
-
Stahl
verklebt werden.
Insert the “L-bent” steel wire into the fuselage before you
glue in the Rudder. Then glue the the steel wire
in.