Hach WDMP sc, User Manual, Page: 9 / 74

• Tubing, ½-inch OD (10 ft)
• Tubing, 1-inch OD (10 ft)
• Cable assembly, 1-m probe extension
• Clamp, hose worm drive
• CL17 analyzer kit (if applicable)—Refer to CL17 analyzer kit on page 9.
Figure 3 Reagents for WDMP sc startup kit
1 CL17 analyzer reagents (if applicable) 4 Conductivity standard solution
2 pH buffer solutions—pH 4, 7 and 10 5 19.2 N H
2
SO
4
for CL17 (if applicable)
3 20 NTU Stablcal standard solution 6 20 NTU Stablcal standard solution, sealed vial with
RFID tag
CL17 analyzer kit
Refer to the list that follows for the items in the CL17 analyzer kit.
• Pinch plate and thumb screws (2x)
• Stir bar, micro
• Filter, 40 mesh SST
• Funnel
• Tubing harness (3x)
• Tube, 11/16-inch OD x 1/2-inch ID, 1.025 ft • Tubing, 0.193-inch OD, 2.333 ft
• Fitting, barb (5x)
• Fitting, elbow
• Hose clamp
• Seal, quad ring
Section 3 Installation
D A N G E R
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
3.1 Mechanical installation
W A R N I N G
Personal injury hazard. Make sure that the wall mounting is able to hold 4 times the weight of the
equipment.
English 9