REFO 3/REFO 3D
Operating Instructions BDA 280 Ed. 4
Concise Operating Instructions
Calibration:
1 Put REFO on the working standard (remove cloth!)
2 Press key Meas/ON
3 Wait for display ok
Gloss Measurement:
1 Use the program key to select program P1
2 Use the angle selector key to set the measuring angle
3 Place REFO on the sample to measure
4 Press key Meas/ON (measuring value is displayed)
Difference Gloss Measurement:
1 Use the program key to select program P2
2 Use the angle selector switch to set the measuring angle
3 Place REFO on the reference
4 Press key Meas/ON to measure the reference value
5 Put REFO on the sample to measure
6 Press key Meas/ON to measure the difference
Three-Angle Measurement:
1 Select program
P3
with the program key
2 Use the angle selector key to choose the first viewing angle to display, if required
3 Place REFO on the sample to measure
4 Press key Meas/ON and wait for the measuring to be displayed
5 Call the other measuring values with the angle selector key
Continual Measurement (only with REFO 3-D):
1 Select program
P4
with the program key
2 Use the angle selector key to choose the first viewing angle to display, if required
3 Place REFO on the sample to measure
4 Start continual measurement by pressing Meas/ON key (3 measurements per second)
5 Move the REFO over the measurement sample and read off the relevant measurement
value
6 Press key Meas/ON to stop continual measurement
