Hach Polymetron 9582sc, Basic User Manual

Page: 9 / 280

Startup
Make sure that the flow rate and pressure do not exceed the values in Specifications on page 3.
1. Open the valve on the sample line to let sample flow through the analyzer.
2. Turn the knob on the flow meter to set the flow rate.
3. Examine the plumbing for leaks and stop any leaks if found.
4. Apply power to the controller.
5. Make the applicable menu selections when the controller starts.
User navigation
Refer to the controller documentation for keypad description and navigation information.
Operation
System configuration
Refer to the controller documentation for system configuration, general controller settings and setup
for outputs and communications.
English 9