38
Options Setup
5.4.7 Dual use (model 3650Ex/113 only)
5.4.7.1 Change from the PC
Use the
Configuration
,
Dual Use
menu to change the measurement phase (either dissolved or
gaseous) for the model 3650Ex/113 dual-use analyzer.
Choose
ppm (dissolved)
to set the instrument for dissolved measurement in liquids, or
%
(gaseous)
to set the instrument to gas phase measurement.
Note:
You can also choose the measurement phase from the instrument keyboard (see below).
5.4.7.2 Change from the instrument
With this dual phase instrument, you can also select the measurement phase (dissolved or
gaseous) using the instrument panel buttons as follows.
1.
Switch the instrument power
OFF
2.
Switch the instrument on by holding down the
Down
Arrow
button and then pressing the
POWER
button while
still pressing the
Down Arrow
button
3.
The instrument will first display
USE
followed by either
dIS
for dissolved phase measurement in liquids or
gAS
for gaseous phase measurement
4.
Use the
Up/Down Arrow
buttons to change the mode to
your choice
5.
Press the
STO
button to set the selected mode. The
instrument displays
Sto
for a few seconds, then returns to
measurement mode
Summary of Contents for ORBISPHERE 3650 Atex
