Hach LXV525.99A15551, User Manual

Page: 45 / 64

4. Connect to your Claros account and provision the controller. Follow the steps in the Claros
interface.
Note: Contact Hach to learn more about Claros or to get a Claros account.
Note: Sensor measurements may go out of view until the controller is successfully provisioned to Claros. If the
controller is disconnected from Claros, make sure to set the Claros button to off to show sensor measurements
on the display.
When the Claros configuration is complete, the Cloud icon shows on the status bar of the main
screen.
6.9 Enter license key
Enter a license key to upgrade the controller software with new functions (e.g., Prognosys, Modbus
TCP, RTC-ORP).
Enter the license key as follows:
1. Push the main menu icon, then select Controller > License.
2. Select one option:
Option Description
Enter license keys Enters a license key to upgrade the controller.
Activated license keys Shows a list with the activated software on the controller.
3. Enter the license key. Push OK.
Note: Contact the manufacturer or a sales representative to get a license key.
A message shows if the upgrade is correct.
6.10 Show the instrument information
Shows information about the controller and connected SC sensors. Shows the controller connection
status.
1. Push the main menu icon, then select Information .
2. Select an option.
Option Description
Controller details Shows the controller serial number, installed software package, the user-defined facility
and location of the controller.
SC Devices
details Shows the data for the connected devices (e.g., 4–20 mA inputs, relays, digital sensors,
digital analyzers and expansion modules). Shows the device type, serial number,
firmware and Claros status.
Connectivity
status Shows the network condition based on the controller connectivity.
• Claros—Shows if the controller is successfully connected to the internet and Claros.
• Wi-Fi—Shows if the controller is successfully connected to internet using Wi-Fi
connectivity. If there is an error, shows possible causes and solutions.
• Cellular—Shows if the controller is successfully connected to internet using Cellular
connectivity. If there is an error, shows possible causes and solutions.
• LAN—Shows the connection condition and the MAC and IP address of each
configured Ethernet port.
Section 7 Maintenance
N O T I C E
Do not disassemble the instrument for maintenance. If the internal components must be cleaned or repaired,
contact the manufacturer.
English 43