Hach LXV525.99A15551, User Manual

Page: 27 / 64

5.2 Enter initial settings
At initial startup, follow the prompts on the display to set up the language, the date, the time and
network information. Refer to
Configure the controller settings on page 25 to change the settings.
Section 6 Operation
6.1 Configure the controller settings
Set the controller language, time, date, facility, location and display options.
1. Push the main menu icon, then select Controller > General.
2. Select and configure each option.
Option Description
Language Sets the language that shows on the controller display and in the log files.
Time zone Sets the time zone. Select the Region and City for the time zone.
Note: When the controller is connected to Claros, Time zone setting is disabled.
Time format Sets the time format: 12 h (default) or 24 h.
Time Sets the time.
Date Sets the date.
Date format Sets the date format: dd/mm/yyyy or mm/dd/yyyy (default)
Facility Sets the name of the facility (32 characters maximum). Default: not selected
Location Sets the name of the location (32 characters maximum). Default: controller serial number
Display Sets the display options:
• Screen lock—When set to on (default), the screen automatically locks after the inactivity
period. When the screen is locked, the touchscreen is disabled and there are no active
areas in the display. Touch the screen and swipe up to set the screen back to on.
Note: The manufacturer strongly recommends not to disable the Screen lock setting. The
Screen lock setting prevents unwanted touches on the screen (especially in outdoor
installations).
• Waiting time—Sets the inactivity period, after which the controller locks the screen. Options:
1, 3, 5, 10 or 15 minutes
6.2 Connect the instrument to a network
Based on instrument configuration, the instrument can connect to a network with internet connectivity
for configuration and operation. Based on the version, the controller connects to the internet with a
cellular network, WiFi network or a LAN connection.
6.2.1 LAN connection
The controller is supplied with two Ethernet connectors based on the controller configuration.
Regardless of the supplied controller, the user must configure the Ethernet ports to the applicable
option.
Note: An Ethernet port upgrade may be necessary based on the controller configuration. Refer to the
documentation supplied with the upgrade kit.
1. Use a user-supplied Ethernet cable (M12 to RJ45)
14
to connect the controller to a device with
internet connection. Refer to Electrical connectors and fittings on page 12.
2. Push the main menu icon, then select Controller > Connectivity > LAN > Ethernet ports.
14
Refer to Replacement parts and accessories on page 47.
English 25