Hach 900 MAX Instrument Manual Download Page 116

Page: 116 / 160

Page 114
Programming Features

8990apdx_pfeatures.fm

Appendix B

Selecting the Channel

Note:

Only the channels for

which logging has been enabled
will be listed.

Press

DISPLAY DATA

from the Main Menu to display a list of logged

channels.

Highlight the desired channel using the

and

DOWN

keys then press

SELECT

Tabular or Graph Format

Highlight the desired display method using the

and

DOWN

keys then

press

SELECT

11:00 AM 21 - APR - 01

DISPLAY DATA

SELECT

FLOW

RAINFALL

RETURN

11:00 AM 21 - APR - 01

DISPLAY DATA

SELECT

DISPLAY DATA

DISPLAY BY GRAPH

RETURN

Table 22 Display Data Functions and Descriptions

Function

Description

Display Data by Table

View from start:

Displays the data for the selected channel beginning with the first (oldest) data point in

memory.

View from end:

Displays the data for the selected channel beginning from the most recent point in memory.

View from time/date:

Displays the data for the selected channel beginning from any desired time and date.

Enters a new desired time and date.

Note:

Totals displayed are calculated by summing the logged data. If the date selected precedes available

logged data (memory has wrapped), the total will be incorrect.

Display Data by Graph

Graph day:

Displays data for a specified date. Data for the selected date is graphed from midnight to midnight.

Graph point in time:

Displays data for a specified time and date. The graph displays three hours of data with

the selected point in the time at the corner of the graph.

Graph partial day:

Zooms in on a portion of the logged data.

Summary of Contents for 900 MAX
































































































































































Search results

Summary of Contents for 900 MAX

Reviews:

Related manuals for 900 MAX

Brands by name

Popular brands

Hach 900 MAX, Instrument Manual

Search results

Summary of Contents for 900 MAX

Reviews:

Related manuals for 900 MAX

Brands by name

Popular brands