Hach Ultra MET ONE HHPC-6, User Manual, Page: 29 / 51

28
Operation
3. Use the
UP
or
DOWN
arrow keys to select a label. When the cursor reaches the top or
bottom label, the screen begins to scroll.
4. Press
F1
(Edit). A box cursor is displayed on the first letter of the label (refer to
Figure 18 ).
5. To change the character, use the
UP
or
DOWN
arrow keys to scroll through the
characters a to z, 0 to 9, A to Z and space.
6. Press
F2
(Left arrow) or
F3
(Right arrow) to move to the next character.
7. Press
F1
(Save) to save the label or
F4
(Escape) to exit the Edit mode without saving
the changes.
4.6.11.2 Edit labels with the MET ONE HHPC–6 utility software
To edit labels using the MET ONE HHPC–6 Utility software:
1. Open the MET ONE HHPC–6 Utility application (refer to section 3. on page 14 ).
2. Highlight the required label and type over the label. Repeat the process until all the
required changes are complete.
3. Select
SET LABEL
to save the changes.
4. Select
GET LABEL
to verify that the changes are saved.
Figure 17 Location menu screen
Figure 18 Edit the location label