Hach Ultra MET ONE HHPC-6 User Manual Download Page 17

Page: 17 / 51

Operation
4.3.1 Keypad

Important Note:

Do not use the MET ONE HHPC–6 stand when operating the keypad.

The MET ONE HHPC–6 keypad (refer to

Figure 7

) contains the following:

•

Function keys

•

—

Starts and stops the sample

•

—

Selects the setup screen

•

—

Selects the Date, Time and Delay Screen

•

—

Selects the sample label screen

The function keys are also used to select the various screens available.

•

POWER

buttons

•

Off

•

and

DOWN

arrow keys

The

and

DOWN

arrow keys are used to scroll within the selected screen. The

and

DOWN

arrow keys also change the LCD contrast of the Main screen

4.3.2 Displays/screens

Press the corresponding button from the keypad at the bottom of the LCD to invoke the
following screens:

•

Main screen

•

Setup screen

•

Clock setup screen

•

Label menu screen

Figure 7 Keypad

Display screen

DOWN

arrow key

POWER

button

Function keys

arrow key

Summary of Contents for MET ONE HHPC-6



















































Search results

Summary of Contents for MET ONE HHPC-6

Reviews:

Hach Ultra MET ONE HHPC-6, User Manual, Page: 17 / 51

Search results

Summary of Contents for MET ONE HHPC-6

Reviews: