Hach Ultra MET ONE HHPC-6, User Manual, Page: 27 / 51

26
Operation
4. Press
F2
(Left arrow) or
F3
(Right arrow) to scroll through the two options available.
5. Press
F4
to select the temperature reporting method (
°C or °F
) and return to the
Main screen.
4.6.9 Set buffer count
To set the buffer count:
1. Press
F2
(Setup) to display the Setup Page 1 screen (refer to Figure 8 on page 19 ).
2. Press
F1
(Page 2) to display the Setup Page 2 screen.
3. Use the
DOWN
arrow key to scroll down to the Buffer Count field.
4. Press
F2
(Left arrow) or
F3
(Right arrow) to scroll through the two options available.
This menu will display the number of samples stored in the buffer (memory).
5. Select Clear Buffer to delete all samples stored in the buffer. The MET ONE HHPC–6
stores sample data measurements in a 500 or 2000 (EX Option) rotating buffer. The
MET ONE HHPC–6 overwrites previous records when the buffer is full.
Note: The MET ONE HHPC–6 deletes previous records in the buffer when the buffer is full,
based on a first in, first out order.
6. Press
F4
(Return) to return to the Main screen.
4.6.10 Set the clock date and time
4.6.10.1 Set the date
1. Press
F3
(Clock) on the Main screen. The Clock Setup screen is displayed (refer to
Figure 16 on page 26 ). The date area is selected by default or by the last change
made in the settings. The cursor indicates the current selection.
2. Press
F4
(Enter) to exit the screen if the information displayed is correct.
3. Press
F1
(Program) to make changes. The display above
F4
will change to
“FORMAT”. The cursor will move to the first two digits of the date.
4. Press
F4
(Format) to toggle the order in which the date is displayed (MM/DD/YYYY or
DD/MM/YYYY).
5. Press
F1
to accept the changes.
6. Press
F4
to exit the screen.
Figure 16 Clock setup screen