Habegger HIT-TRAC 16 E, Original Operating Instructions

Page: 72 / 82

72
Rope: Cleaning X
Rope: Checking diameter
For worn ropes, when rope diameter
is < 10 mm or < 7.4 mm:
Replace the rope!
Oil level in inspection
glass
X
The machine, rope and accessories have to be checked at least
every 2 years (see label on the control box) by the manufacturer or an
authorized site. During this inspection, all parts are checked for
deformation, wear and tears.
Furthermore, an expert should also carry out inspections between the
annual inspections, depending on the operating and application
conditions.
8 List of spare parts
The spare parts list can be found on pages 74 - 77
9. Accessories
9.1 Reel drive
9.1.1 Rope coiler
The rope coiler is used to wind and unwind the rope on and off the reel easily.
1. Remove crank handle
2. Push reel onto the hub and clamp tightly into
place with the star grip.
3. Place rope below the rope guide.
4. Unwind the rope.
5. To wind up the rope, clamp the crank handle
onto the reel.
І
For ropes longer than 50 m we recommend to use the reel drive in
order to avoid malfunctions or accidents caused by the loose rope
which! Is lying around