Habegger HIT-TRAC 16 E, Original Operating Instructions

Page: 64 / 82

64
▲
Prior to carrying out any work, the housing cover over
the drive system has to be closed and locked. This
prevents the rope from derailing, and keeps foreign
bodies out of the system.
The free end of the rope has to be able to exit freely from the pulling machine.
І
Never pull the hock against the housing.
The pulling force at the loose end of the rope shall not exceed 25 kg. I.e. at the most 50 m
of loose rope are aloud to hang at the machine.
∆
Risk of slide with little load! The loose end is not aloud to hang
freely by lifting height above 50 m
When you are lowering a load make sure that the rope is long enough. Stop at the latest
2 m before the end of the rope and place a support underneath the load or reattach it.
3.4 Qualified operators
The motor-driven rope-pulling machine may only be operated by authorized persons. As
owner of the motor-driven rope-pulling machine it is your responsibility to make sure that
the operator is provided with the Operating Manual and that he has read and understood
the instructions contained therein.
3.5 Warranty and liability
Claims for warranty and liability for personal injury and damage to property shall be
excluded if they can be attributed to non-observance of this Operating Manual.
3.6 Measures in case of an emergency
Before you begin working, always determine if there is reception of mobile telecom or
where the nearest telephone is located. Check whether a first-aid kit is available.