Habasit Italiana S.p.A.
Via del Lavoro 50
I-31016
– Cordignano (TV)
Tel.: +39 0438 9113
Fax: +39 0438 912374
Use and maintenance manual
CQ-02
Author:
FT
Page 9 of 14
Edition:
04/2018
R. 0
Replaces:
Open the screw clamps [2] by unscrewing the knobs
[8] and remove the joined belt.
If the welder W-01 is not in use, disconnect it from
the mains power supply.
Remove the bead with a sharp knife or by deburring
with abrasive cloth
7 Maintenance
Always keep the joining clamp clean. Clean regularly the heating plate of the welder and remove all material
residues. Clean the heating plate while heated with a cotton cloth.
Check that the positioning bars [1] and the screw clamps [2] works correctly. If necessary, clean and slightly
lubricate the dowel pins [6].
7.1 Accessory/spare parts orders
Spare parts and accessories can be directly ordered from the manufacturer at the following address:
Please clearly specify ordered part codes.
Enter
codes based on Drawings (see chapter “SPARE PARTS”) and, if possible, the power voltage required
for mains connection.
The use of other branded spare parts that do not meet Habasit specifications is prohibited.
Habasit is not liable for the use of non-original Habasit spare parts.
7.2 Warranty
All tools are subject to attentive final inspection. They are guaranteed free of material and factory defects for
1 year provided they are used correctly.
Habasit Italiana S.p.A.
Via del Lavoro, 50.
31016 CORDIGNANO (TV) - ITALY
Tel.: +39 0438 9113
Fax: + 39 0438 912374
Summary of Contents for PQ-02
Page 20: ......
